Terzo Brake Fluid DOT 5.1 High-Performance Brake Fluid 1

Description Terzo Brake Fluid DOT 5.1 High-Performance Brake Fluid 1L. Description A High Displacement Racing fully synthetic brake fluid having the following properties: – good resistance against ageing – a very good compatibility with seals and gaskets – minimal corrosion tendency – high wet boiling point – optimal viscosity at low temperatures Application Applicable for all hydraulic brake systems with drum or disk brakes requiring a synthetic brake fluid and where a brake fluid of the type Class 6 is prescribed.High-Performance Vehicles: It is suitable for racing cars, sports cars, and high-performance vehicles, capable of maintaining stable braking performance under extreme conditions. Specifications FMVSS 116  DOT 5.1 SAE J1703, ISO 4925 Brake fluid DOT 5.1 uses glycol ether and borate ester compounds but has an enhanced performance like the silicon-based DOT 5. We can say that it is a non-silicone version of DOT 5 but compatible with DOT 3 and DOT 4 types of braking systems and fluids. Synthetic brake fluid based on glycol ethers, alkyl polyglycols and polyglycol esters. It contains inhibitors to prevent the corrosion of metallic brake components and to reduce oxidation at increased temperatures. The brake fluid has an excellent wet and dry boiling point, thus ensuring safe braking even after the absorption of some moisture over an extended period of use. Special moisture scavengers help to prevent against the formation of vapor bubbles.   Exceptionally well-suited for use with all disk and drum brake systems, as well as vehicle clutch systems for which a synthetic brake fluid of this specification is prescribed. The brake fluid is also ideally suited for use in ABS brake systems.   Applic­a­tion Can be used in all conventional brake fluid bleeding devices. Miscible and compatible with all high-quality synthetic brake fluids. The optimal period of use for this brake fluid is, however, only ensured when it is used alone. It is recommended that the brake fluid be changed in accordance with the specifications from the vehicle manufacturer. Typicals Density at 15 °C, kg/l 01062 Viscosity -40 °C, mm²/s 1240 Viscosity 100 °C, mm²/s 2,07 Boiling Point (reflux).°C 269,4 Wet Boiling Point, °C 167,8 pH – 50% in ethanolsolution 7,8 Moisture wt% 0,1 Conductivity/us/cm2 0,697