Saramonic SmartRig Di Two-Channel Mic and Guitar Interface w/ Lightning Connector for iOS Devices

The SmartRig Di provides two independent input channels with dedicated gain controls, allowing you to mix and match microphones and instruments at the same time, and choose mono or stereo output for flexible recording setups on iOS devices. It includes 48V phantom power for condenser mics, a 3.5 mm headphone jack for real-time monitoring, and runs on a single 9V battery, making it ideal for mobile filmmakers, podcasters, and musicians on the go.FeaturesTwo-channel interface with independent gain knobs for each channel.​Multiple inputs: 2 x XLR, 2 x 3.5 mm (TRS) mic inputs, and 2 x 1/4″ (6.35 mm) guitar/instrument inputs.​MFi-certified Lightning output for iPhone, iPad, and iPod touch, plus 3.5 mm headphone output for monitoring.​ 48V phantom power switch for condenser microphones and mono/stereo toggle for flexible recording modes.​Wide 20 Hz–20 kHz frequency response, low distortion, high signal-to-noise ratio, powered by one 9V battery in a compact, lightweight housing.SpecificationFrequency Response: 20Hz to 20kHz, /-0.5dBDistortion: Less than 0.01% @ 1kHz, -30dBu inputSignal to Noise Ratio: 80dB @ 1kHz, -30dBu inputNoise: -98dB full band (with Phantom Power)Gain: 23dBuMaximum Output Level: 2VrmsPhantom Power: 48VPhantom Max Current: 13mAChannels: 2Inputs: 2 x XLR 1/4″ (6.35mm) Combo Jack and 2 x 1.8” (3.5mm) TRSSelectable Mixer: Mono or Stereo Output via Toggle SwitchOutputs: 1 x MFi Certified Lightning Output Cable and 1 x Female 1.8” (3.5 mm) Headphone JackBattery: 1 x 9-volt (Alkaline or Lithium)Dimensions: 4.72″ x 1.57″ x 1.57″ (120 x 40 x 40mm)Weight: 4.6 oz (130g)Package Includes1 x Saramonic SmartRig Di Two-Channel Mic and Guitar Interface1 x Carry Case1 x Reusable Fastening Strap1 x Warranty Card